[source]
------
1. It is important that you use the proper oil for your skin type! For instance; those that have very oily, acne prone skin may have adverse reactions to Olive Oil as it is very, very heavy. While those that have drier skin may need heavier oils like Olive or Avocado. If you are in the dark about which oils to use for your skin type, check out these posts [post 1, post 2] before making your skin care mixture. It will save you a lot of trial and error.
2. Make sure you remove all traces of oil after oil cleansing. Sebum and bacteria-laden oil that is left on the skin can actually trigger additional breakouts. After removing oil, take a cotton ball filled with toner and sweep it across your face, if you see residue or dirt on the cotton ball, it's a friendly reminder to wash and rinse thoroughly.
Also make sure you keep these tips in mind;
Also make sure you keep these tips in mind;
- Make sure your towel is warm enough so that the heat opens your pores. Remember the oil from your oil cleansing formula is what dissolves the oils trapped in your pores. It is important to open the pores in order for the enzymes in the oils to dissolve the blockage.
- Use a new washcloth daily to cut down on cross contamination. - When you drop your washcloths in the machine, add a bit of Oxyclean [or a similar product] to your cycle as it is very effective in removing grease/oils from fabrics.
- Are you using too much Castor Oil? It is important to remember that Castor Oil is the cleansing agent. If your formula leaves your skin feeling dry and stripped, it may be time to lower the amount of Castor Oil in your mixture and up the amount of your secondary oil.
- Make sure you thoroughly cleanse around the sides of your face, your hairline, and chin areas as those are all areas that are prone to breakouts.
- Are you cross contaminating your face with cell phones and house phones? It's important to keep those devices clean as well.
Follow MTM on Twitter | Add MTM on Bloglovin' | Like MTM on Facebook
